Buenospa
Chicago Hot Tub
Chicago Hot Tub
Couldn't load pickup availability
Share

The Chicago Hot Tub
A seven-seat outdoor spa built as a gathering space — an 85-inch square shell with the seats arranged so a group can sit facing one another and hold a conversation rather than lining up shoulder to shoulder. 58 jets are distributed across the seven positions, and no two seats are configured the same way, so people can move around and find the one that suits them.
Please note: this spa is hard-wired, not plug-in. It requires a dedicated 50 A / 240 V circuit, 6 AWG copper four-wire including ground, installed by a licensed electrician with a GFCI disconnect. Most jurisdictions require a permit and inspection. Budget the electrical work alongside the spa.

Four seat layouts across seven seats
- Relax — jets across the shoulders and down the length of the back, with further jets at the hips and knees.
- Expert — adjustable nozzles let you set both the direction and the strength of the flow, so this seat can be tuned to whoever is in it.
- Focus — jets along the length of the back, directed at the hips and thighs; similar coverage to the Expert seat in a fixed configuration.
- Cool Down — a raised seat at the edge of the spa with lighter jet coverage along the back, for sitting up out of the water between sessions.
All seven are bucket seats; four headrests are fitted.
59 water outlets, 58 of them jets
Buenospa counts 59 H₂Outlets™ in the shell: the 58 jets, plus a dedicated ozone sanitization outlet that injects into the circulating water as part of the water-care routine.
Equipment
A Gecko in.yj-3 control pack runs the spa from an Easy 4 backlit LCD keypad — a straightforward multi-function panel that stays readable in daylight and at night. Two pumps drive the jets: one 3 HP single-speed and one 3 HP dual-speed, the latter also handling continuous filtration and heating on its low setting. A 4 kW heater brings the water up, water passes through a Superfine paper cartridge filter, and 11 LEDs light the shell. One drain.
Construction
A WPS (Wellis PolyStyrol) frame reinforced with polyurethane, Polyfoam Scandinavian insulation, and a white acrylic shell. The base is a reinforced one-piece moulded ABS floor pan whose sides turn upward to seal the structure against moisture and insects from the ground, with a reflective barrier running across the pan to stop heat being drawn out through the base by damp earth — the "cold sink" effect that quietly raises running costs on spas built on a plain frame. The cabinet is grey with HorizontSide™ UV-proof, wood-textured panelling: it reads as timber but won't split, grey out or need refinishing.
Specifications
- Part number: WM00763
- Dimensions: 85.43" × 85.43" × 36.61"
- Seating: 7 bucket seats · 4 headrests
- Water volume: 300 gallons · Dry weight: 728 lb
- Jets: 58 · Total water outlets: 59 H₂Outlets™ (58 jets + 1 ozone outlet)
- Pumps: 1 × 3 HP single-speed, 1 × 3 HP dual-speed
- Heater: 4 kW
- Control: Gecko in.yj-3 pack with Easy 4 LCD keypad
- Filtration: 1 × Superfine paper cartridge filter
- Water care: ozone sanitization outlet
- Lighting: 11 LEDs
- Frame: WPS · Reinforcement: polyurethane · Insulation: Polyfoam Scandinavian · Floor: reinforced moulded ABS pan with reflective barrier
- Shell: white acrylic · Cabinet: grey with HorizontSide™ UV-proof wood-textured panelling
- Drain: 1
- Power: 50 A / 240 V / 60 Hz, 6 AWG copper, 4-wire including ground — hard-wired
- Thermal cover: optional, sold separately (standard 5–3.5 in. taper)
Siting and delivery
Filled and occupied the spa weighs roughly 4,500 lb across about 51 square feet — near 90 lb per square foot. It needs a level base built to the owner's manual's specification; do not site it on a deck, balcony or raised structure without an engineer's assessment, and leave service access to the equipment bay. At 85.43 inches square it will not pass through a doorway or a standard gate, so confirm the delivery route — including gate widths, corners and turning radius — before ordering, and budget for a crane if the yard has no open access.
Please note
No thermal cover is included. A cover is strongly recommended: on a 300-gallon spa it is the main thing keeping heating costs down, and a locking cover is the standard safety barrier where children have access. Check your local requirements before installation.
Warranty and returns
Buenospa limited warranty: structure 5 years · shell 3 years · major components 2 years · plumbing 2 years · labour 1 year, to the original purchaser for residential use. 100-day return policy.
Who it's for
Households that entertain, and anyone who wants a spa big enough that nobody has to wait a turn — with enough variation between seats that a group of seven isn't all getting the same massage.
Before you use it
Hot water immersion carries real risks. Keep the water at or below 104°F, limit soaks to 15–20 minutes, and get out if you feel dizzy, drowsy or nauseated. Do not use alcohol or drugs before or during a soak. Talk to your doctor first if you are pregnant or have a heart condition, high blood pressure, circulatory problems or diabetes. Children overheat much faster than adults: they should use the spa only under close adult supervision, for short periods, and never in the hottest seats. Keep the spa covered and secured whenever it is unattended — an uncovered spa is a drowning hazard. Never soak alone, and keep electrical appliances away from the water.


