Thrive Sector
BONTANNY BL-2400 Red and Near-Infrared LED Light Panel, 480 Dual-Chip LEDs, 660 nm and 850 nm, 800 W, 53 x 18 in. Full-Body Panel with Timer and 3 Modes (Stand Sold Separately)
BONTANNY BL-2400 Red and Near-Infrared LED Light Panel, 480 Dual-Chip LEDs, 660 nm and 850 nm, 800 W, 53 x 18 in. Full-Body Panel with Timer and 3 Modes (Stand Sold Separately)
Couldn't load pickup availability
Share

The BONTANNY BL-2400 is a full-body LED light panel with 480 dual-chip LEDs arranged in eight blocks across a 53 x 18 inch white aluminum face. Each LED carries a 660 nm red chip and an 850 nm near-infrared chip, so the entire panel emits both wavelengths in combined mode or either one alone. A side-mounted digital control panel with a numeric display and three buttons selects red, near-infrared, or combined output and sets the countdown timer, which shuts the panel off automatically at the end of a session. Eight rear-mounted cooling fans and full-length side vents keep the 800 W panel cool during longer sessions, and a rear rocker switch cuts power to the unit without unplugging it. Manufacturer-rated irradiance is 130 mW/cm² at 6 inches, with EMF measured as undetectable at the recommended use distance. The panel stands on four rubber feet, hangs from its top hardware, or mounts on the BONTANNY floor stand (sold separately) for vertical or horizontal use. Protective eye mask and user manual are included; wear eye protection during every session and position the panel 4 to 12 inches from the body as directed in the manual.
- 480 Dual-Chip LEDs, 660 nm and 850 nm: Every LED contains both a red chip and a near-infrared chip, so combined mode delivers both wavelengths from the full face rather than alternating rows. Red light is visible; near-infrared is not.
- Three Modes with Timer: Red only, near-infrared only, or both, selected from the side control panel. Set the countdown and the panel switches off on its own.
- 800 W Output: Rated at 800 W ±5 W with a manufacturer-measured irradiance of 130 mW/cm² at 6 inches.
- Eight-Fan Cooling: Eight rear fans and side vents draw air through the aluminum housing for continuous operation. A rear rocker switch and standard IEC power inlet keep the cord and power control off the front face.
- Low EMF: Electromagnetic field output is undetectable at the recommended use distance.
- Vertical or Horizontal Use: Stands on its rubber feet, hangs from the top mounting points, or attaches to the BONTANNY floor stand (sold separately) for upright or overhead positioning.
- Included: BL-2400 panel, user manual, protective eye mask.
- Specifications: 53 x 18 x 3 inches, 46 lbs (21 kg), 800 W, 480 dual-chip LEDs. Backed by a 3-year manufacturer warranty.


