Gurgle Wood & 304 Stainless Steel Cold and Hot Plunge Pool with Integrated 1 HP Chiller/Heater – 75 in, 240 V

A single-person plunge pool with a 304 stainless steel inner chamber, wood-clad exterior and a matched 1 HP chiller/heater unit. One system covers both ends of the range — down to 37°F for a cold plunge, up to 108°F for a warm soak — set from a touchscreen on the chiller.

Please note: this is a 240-volt appliance. It does not plug into a standard household outlet. Installation requires a 220–240 V circuit and receptacle fitted by a licensed electrician. Confirm the plug type and breaker requirement with the seller before you order.

Stainless steel where the water is, wood where you see it
The inner chamber is 304 stainless — non-porous, easy to wipe down, and it doesn't stain, absorb odours or degrade in cold water the way a liner can. Around it, a stainless steel banding belt with integrated thermal insulation reduces heat gain so the chiller cycles less, and the outer shell is natural wood panelling.

Cooling and heating from one unit
The 1 HP chiller/heater delivers 2,450 W of cooling and 3,800 W of heating while drawing a maximum of 1,060 W (900 W compressor) — the output figures are heat moved, not power consumed. Temperature range is 3–42°C (37–108°F), set and monitored on the unit's digital touchscreen, with remote control operation. Two reinforced hoses connect the chiller to the tub, so the unit stands beside the pool rather than being built into it.

Water care
An ozone injection circuit and a water filtration stage run on the circulating water between sessions, and a set of spare filters is included with the pool.

Included
Plunge pool with 304 stainless inner chamber and wood outer shell, 1 HP chiller/heater unit, two reinforced connection hoses, insulated cover, spare filters.

Specifications

Pool

• Inner chamber: 304 stainless steel
• Outer shell: natural wood panelling
• Insulation: stainless steel belt with integrated thermal insulation
• External dimensions: 75" × 31" × 30"
• Net weight: 379 lb
• Shipping dimensions: 79" × 35" × 36"
• Shipping weight: 507 lb
• Cover: included

Chiller / heater

• Capacity: 1 HP
• Cooling output: 2,450 W · Heating output: 3,800 W
• Temperature range: 3–42°C (37–108°F)
• Power supply: 220–240 V, 60 Hz
• Input power: 1,060 W · Compressor: 900 W
• Dimensions: 620 × 424 × 556 mm (24.4" × 16.7" × 21.9")
• Weight: 35 kg (77 lb)
• Weather rating: IPX4 (protected against splashing water; not immersion or standing water)
• Connections: 2 × reinforced water hoses
• Functions: cooling, heating, ozone injection, filtration, remote control, touchscreen display

Siting, power and delivery
The pool weighs 379 lb empty and adds about 8.3 lb for every gallon of water, across a footprint of roughly 16 square feet. Place it on a slab or a ground-level pad that can carry that load; do not site it on a deck, balcony or raised floor without having the structure assessed. Give the chiller clear air on all sides to reject heat, keep it level and out of standing water, and use GFCI protection. The pool ships by freight at 507 lb — plan for help and a clear path. Inspect the shipment at delivery: damage must be reported to the seller within 48 hours with photographs.

Maintenance

• Daily: check water level, rinse the filters after use
• Weekly: clean the tub interior, check hose connections, verify temperature calibration
• Monthly: service the chiller unit, inspect the ozone and filter system

Warranty
One year on the stainless steel tub and wood frame, one year on the chiller/heater unit, one year on the electronics and control panel.

Who it's for
Home wellness rooms, garden installations and training facilities that want a fixed, permanently plumbed-free plunge with the durability of a stainless chamber and the appearance of wood — and that have, or can install, 240 V power at the site.

Before you use it